DCS losing Focus when transmitting on Teamspeak

Here you will find information relating to Comms systems that we use at RAF Air UK

DCS losing Focus when transmitting on Teamspeak

Postby Flyco » 07 Jun 2018, 20:43

We found Sherbert's problem, but it is not one I have met before.

With TeamSpeak and DCS running, when he transmits on TeamSpeak he loses focus on DCS. This means that he loses all input to DCS until he re-clicks back on the DCS screen - by which time he has lost control of the aircraft.

He uses multiple screens and I think this is where the problem arises. However, I also use three screens and don't have this problem. Has anyone any suggestions?

-Sudden flash of Light!!! - Sherbert a thought has occurred to me. Check that in the DCS Controls page you do not have Full Screen ticked. I seem to recall that unticking that in my set-up cured some focus type problems, although the details are lost in my dead brain-cells.

Let me know whether that is better - If not we can get together for an hour one evening and work through your multi-screen set-up.
Squadron Leader Alan Johnson - RAFAir UK
Image
Image Image Image Image
Flyco
Site Admin
 
Posts: 1359
Joined: 11 Jan 2015, 14:30
Location: York

Re: DCS losing Focus when transmitting on Teamspeak

Postby Sherbet » 07 Jun 2018, 20:51

I do have full screen checked. PC shut down now but ill try again tomorrow night and report back. Hopefully that's the issue.

Thanks Alan
Student Pilot Paul "Sherbet" Short - RAF Air UK

Image
Sherbet
 
Posts: 8
Joined: 30 May 2018, 14:44


Return to Flight Communications Support